• This custom set of  hand-wound modern Samurai Dawn pickups feature vintage styling with modern tech. Made with the finest materials. The scale is 49.2mm  like vintage PAF fits Les Paul style and  two humbucker type guitars. Can be used on imports but check scaling will fit most mounting rings without any modifications.
  
•  The neck pickup  over-wound 4.80%  and the  bridge pickup is over-wound 18.60%  and sings with the modern tones late. Pinch harmonics ring with ease and effortless taps.  Wound with a beautiful red 42 AWG modern single poly wire, taped and double potted to silence microphonics.
• Samurai Dawn pickups have a 4 conductor shielded wiring and can be wired for standard humbucking or as coil tap or for phasing use color code to design your hookups
  Wiring color code diagram:
  Red = +
  Black = -
  White = finish screw side
  Green = finish slug side
  Bare = ground
  (Solder white and green together for traditional humbucking)
  
•  These Alnico 3 magnets oriented South to screws and North to vintage bullseye slugs
•  High quality short leg Silver Nickel baseplates  not plated brass.
  Made in the U.S.A. Hand wound in my shop in Texas
  Though ohms are subject to change in temperature these read:
•  Neck 7.81 K  (4.68Henries)
• Bridge 8.80 K (5.78 Henries)
      measured around 70 degrees
  
• If you want to breathe life into an old guitar, make repairs or build a new project these pickups are the ticket for classic modern  tones. Want to capture the sound of hard rock and roll dial in your sound and nail it